Tk Series Synchronous Motor for Drive Compressors and Pumps Tk1000-18 1730 1000kv 6kv IP20

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk1000-18 1730 1000kv 6kv IP20

I. Overview
The massive a few-period synchronous motor for TK series air compressor is a high-performance sequence merchandise specifically created and produced by our company for the load of air compressor.
This sequence of motors adopts new technologies, new supplies, new procedures, beautiful content variety, and advanced production. It has the qualities of little measurement, gentle bodyweight, gorgeous look, large efficiency, lower sound, low vibration, safe and reliable operation, and practical use and routine maintenance.

2. Implementation standards
GB755 Rotating Motor Score and Efficiency
Classification of GB/T997 rotary motor composition type, installation sort and junction box placement (IM code)
GB/T1571 A few-phase synchronous motor examination technique
GB/T1993 Rotating Equipment Cooling Method
GB/T4942.one Safety class (IP) classification of the general construction of rotating electrical machines
GB/T10068 The measurement, evaluation and restrict of mechanical vibration with a shaft middle top of 56mm and above
GB/T10069 Rotating Equipment Sounds Measurement Strategy and Restrict
JB/T8667.1 CZPT Conditions of Large 3-phase Synchronous Motor Component 1: TK Series
3. Simple technical parameters
Electricity range: 250~10000KW
Rated voltage: 6000, 10000V
Rated velocity: 250, 273, 300, 333, 375, 428, five hundred, 600r/min
Rated frequency: 50HZ
Defense degree: IP00, IP20, IP23, IP44
Insulation class: F
Quota: SI
Cooling approach: IC01, IC37, IC81W
Set up strategy: IM7311, IM5710, IM7312, IM7315
*Can be produced in accordance to other parameters in accordance to person requirements
4, specialized qualities
4.one The structural layout is affordable, protected and trustworthy, and the capacity to phase out of action is powerful.
4.two The principal insulation structure using new insulating materials has large voltage resistance and prolonged motor lifestyle.
4.three The temperature increase margin is big. The motor adopts F-course insulation, and the temperature rise is assessed in accordance to the temperature increase limit of the B pole insulation.
4.4 The defense device is sophisticated and complete.
four.1.one The stator windings and bearings are outfitted with temperature detection gadgets, which can detect, alarm and excursion.
four.four.2 Shutdown place heater with anti-condensation impact.
4.five Massive inertia. Motors with diverse times of inertia can be produced according to consumer wants.
5, structure type
five.one The all round composition of this sequence of motors is welded with steel plates for the body, end include, and bottom plate. The motor is an impartial cavity, and the slip ring can be designed with distinct protection stages in accordance to consumer needs.
five.two Stator: The stator frame is welded by metal plate. The motor stator outlet is led out by a high-voltage rubber cable. The outlet position can be led out from the reduced part of the base or from the principal junction box on the side of the motor.
The stator main is superimposed by reduced-decline silicon metal sheets, and the main sections are separated by radial ventilation ducts.
The stator winding is F quality insulation, and the temperature increase is assessed according to B quality to assist increase the services life. It adopts VPI overall dipping paint treatment, which has high electrical performance, mechanical strength, insulation performance, humidity resistance and thermal balance.
5.3 The rotor magnetic pole core is made of laminated metal plates, and has different buildings this sort of as magnetic pole screws and T tails. The rotor bracket has ventilation holes and is equipped with a admirer, which can nicely control the temperature increase of the rotor.
five.four Adopt seat type spherical sliding bearing. The bearings are insulated to avoid shaft currents.
Use new lubricating oil and skinny-walled bearing alloy tiles, and set electromagnetic centerline indicators.
five.five According to person demands, the slip ring can be made as a constructive pressure ventilation construction to improve the basic safety of the motor. The complete length of the motor with the constructive stress ventilation framework of the slip ring is marginally enhanced.
6. Situations of Use
6.1 Voltage fluctuation: ±5% (It can operate below ±10% below the situations of seven.three in GB755)
6.two Frequency fluctuation: ±2%
six.3 The altitude does not exceed 1000m
six.four The optimum ambient temperature does not exceed +40ºC, and the bare minimum is 0ºC.
7, design description
 TK1250-sixteen/2150

Outer diameter of stator punch (Φ2150mm)

Quantity of poles (16 poles)

Rated energy (1250KW)
3-section synchronous motor for compressor
8. Buying recommendations
8.one Before placing an get, make sure you refer to the product catalog of this collection to make clear the necessary item product, specs and other info. If there is a discrepancy between the specifications and the samples, remember to contact our company.
eight.2 The motor product, rated electricity, synchronous speed, rated voltage, rated frequency, defense degree, second of inertia, rotation direction, installation variety, and so forth. need to be indicated when ordering.
8.three The sample technical info sheet only lists the pertinent info of motors with rated voltages of 6KV and 10KV. If consumers need to have other voltage stages, our business can also supply appropriate specialized knowledge when purchasing.
8.4 The technological knowledge and proportions in the sample are only for reference when the person selects the design. The official info will be supplied by the firm soon after the deal or technical settlement is signed.
eight.five If there are any other particular demands, remember to supply the demands and indication the appropriate technological arrangement when ordering.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk1000-18 1730 1000kv 6kv IP20

Tags: